REQUEST: Portland Pioneers, Las Vegas Golden Knights, Phoenix Diamondback & Arlington Rangers

vulcan4 · 03-04-2017, 11:29 PM

I have about 7 teams I need done to finish my fictional league. I am going to try to attempt to do three of them on my own and I thought I'd ask the masters/experts (

) here for some help to do the others. I have provided the team's colors with their logos in this post. I would appreciate, very much, any assistance I can get with these.

Looking for jerseys and caps for all of them (Home, Away and Alternative?). I suck at doing logos, so if anyone reading this would like to do logos for these, please feel free. Would Like drop shadow ones for each if possible. I will post one team per post. Ok, here we go:

Portland Pioneers:

vulcan4 · 03-04-2017, 11:33 PM

Las Vegas Golden Knights:

vulcan4 · 03-04-2017, 11:38 PM

Phoenix Diamondbacks (I have downloaded 1 cap and one jersey that has Phoenix and a 'P' on it, but would like some custom/alternative jerseys and caps if possible) - I'll post the only cap I found on this forum, the other two logos I'd like on the jerseys and/or caps with some Phoenix jerseys:

vulcan4 · 03-04-2017, 11:41 PM

The Fourth team all I need is Arlington Rangers. I can use jerseys with 'Rangers' on them from the real Texas Rangers, but would like caps with an 'A' on it (the 'A' in the word TEXAS would be cool. Or the same font that is used on the Texas cap logo. Not sure what font that is) and some home/away/alternative jerseys with 'Arlington' on them.

Thank you in Advance!!

txranger · 03-06-2017, 02:26 PM

I just did a Phoenix set by request... Here is the link, maybe you can use it...

http://www.ootpdevelopments.com/boar...postcount=7446

vulcan4 · 03-06-2017, 09:19 PM

Quote:

Originally Posted by txranger

I just did a Phoenix set by request... Here is the link, maybe you can use it...

http://www.ootpdevelopments.com/boar...postcount=7446

VERY Nice!!! Darn right I'm using them (it). Thank you, I appreciate this.
I wonder why it didn't come up in my 'advanced search' on this forum. I try to do searches if there are any out there to use and I do(have) found ones I can use (like yours). Thank you again. My main PC needs a new PSU, so I will have to download your uni and logo wed when i install it.

)

vulcan4 · 03-07-2017, 03:06 PM

I'm going to attempt to do a couple of these myself. I know there are a LOT of requests that are posted here and I'm basically adding to that pile, lol =/ . One day, I am hoping I'll be good enough to do requests like the Masters do here

.

So, that being said, could anyone tell me what font is used for the Texas Rangers? I want to re-name my MLB Universe Texas Rangers to the Arlington Rangers, so I would need the font for the 'A' for the cap and obviously for 'Arlington' on the jersey.

Thank you all!!! And have a Blessed Day.

txranger · 03-07-2017, 03:32 PM

Since it's the Texas Rangers, I will make you a set for them...

vulcan4 · 03-07-2017, 03:46 PM

Quote:

Originally Posted by txranger

Since it's the Texas Rangers, I will make you a set for them...

Well, that's Mighty kind of you, cowboy, Lolololol....

.
Thank you!! Do you know the name of the font as well? I ask because I want to redo the logo too.

I'll get better doing these mods.
My main PC is down 'till tomorrow and I've purchased tons of paint/photo editing software I can use for doing all of these. Also, I know there are Portland Pioneers sets on this forum, but I just think that logo guide i linked up top is just so cool and it's not 'cartoonish' imo.

Thanks again for the Arlington set, my fellow OOTP'er, hahahaa...

txranger · 03-07-2017, 04:00 PM

The font I will be using is called MLB Texas Rangers... That is the closest one you will probably find...

txranger · 03-07-2017, 05:30 PM

Arlington Rangers

vulcan4 · 03-07-2017, 06:10 PM

Thank you Very Much, txranger. What more can one say anymore to those who put their own time and effort/work into someone elses interests. OOTP is certainly one of the best, if not 'the best', online communities out there.

Perfect.

One day soon I'll be able to pay it forward to someone else. I had started doing logos and jerseys about a yr or so ago and then had a severe PC crash and lost everything I had on those HDs. Nope....didn't back anything up and I learned the hard way. I had so much saved on that drive. I have three HDs now, lol. Two SSDs and one HHD.

Thank you once again, txranger.

ArcAngel · 03-07-2017, 06:35 PM

Quote:

Originally Posted by txranger

The font I will be using is called MLB Texas Rangers... That is the closest one you will probably find...

Is that a commercial font? Or one of Conrad's?

txranger · 03-07-2017, 08:47 PM

Quote:

Originally Posted by vulcan4

Thank you Very Much, txranger. What more can one say anymore to those who put their own time and effort/work into someone elses interests. OOTP is certainly one of the best, if not 'the best', online communities out there.

Perfect.

One day soon I'll be able to pay it forward to someone else. I had started doing logos and jerseys about a yr or so ago and then had a severe PC crash and lost everything I had on those HDs. Nope....didn't back anything up and I learned the hard way. I had so much saved on that drive. I have three HDs now, lol. Two SSDs and one HHD.

Thank you once again, txranger.

Your most welcome...

txranger · 03-07-2017, 08:47 PM

Quote:

Originally Posted by ArcAngel

Is that a commercial font? Or one of Conrad's?

Conrad's

vulcan4 · 03-07-2017, 09:04 PM

Ok, I've decided I'm going to attempt to do the 'easier' of the two (Portland Pioneers &/Or the Las Vegas Golden Knights) which in my opinion will be the Vegas Golden Knights. The one thing I am concerned that I might not be able to do is putting the letter 'G' with the letter 'K' for a jersey patch (on left of chest). I will use the swords or helmet as a patch on the chest since those are primary logos. I was choosing between this Las Vegas team or the other one that was in the running for the NHL expansion team the 'Black Knights'. I decided with the Golden Knights because of the colours (the off green shades and golden colours) and the name as it has 'Golden' in it.

I'll post them as soon as I'm happy with them. I will also put up a few more requests this week as soon as my main PC is up and running (should be tomorrow) because I know for sure I wouldn't be able to do them myself. My problems mainly exist in making a logo or letter not look all 'pixelated' if that makes any sense.

txrnger - lol, I'm not kidding....you and a few others around here are like celebrities to me, hahahaha. It's an honour having you do a uni set for me, my fellow OOTP'er

.

txranger · 03-07-2017, 09:09 PM

Thank you, thank you very much...

txranger · 03-07-2017, 09:11 PM

If you have a font in mind for the Knights let me know or I can try and match it and make you a GK for the chest... I guessing you are using the colors in the logos posted above???

vulcan4 · 03-07-2017, 09:31 PM

Quote:

Originally Posted by txranger

If you have a font in mind for the Knights let me know or I can try and match it and make you a GK for the chest... I guessing you are using the colors in the logos posted above???

Yes. When I post logos or team names (just like what I did f\in this post) I use those colours UNLESS I specify differently. In this case, the Golden Knights have those two shades of green - the Green where it just has 'Vegas Golden Knights' and the logo with just the helmet and then the "other" Green where it has the helmet, swords and name. Those two Green, a white and a touch of black and red are the teams colours, but as u'd imagine, the black and red would be alternate jersey/cap colours.

I'm pretty sure you get what I'm saying.

For example, I am using Jersey creator and I have the jersey with the primary Green colour (the green with with helmet,swords and team name) as the jersey colour and I cut out the letter 'V' and used that on the chest. Just for example.

I have no font in mind. Was just going to go with what is on those images.

vulcan4 · 03-07-2017, 09:39 PM

Regarding the patch/lettering that would go on the left side of chest - Typically, how wide/high/low would that 'GK' (for example) go/be? That is another problem I have in regards to placement of such things.

03-04-2017, 11:29 PM	#1
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	REQUEST: Portland Pioneers, Las Vegas Golden Knights, Phoenix Diamondbacks & Arlington Rangers I have about 7 teams I need done to finish my fictional league. I am going to try to attempt to do three of them on my own and I thought I'd ask the masters/experts ( ) here for some help to do the others. I have provided the team's colors with their logos in this post. I would appreciate, very much, any assistance I can get with these. Looking for jerseys and caps for all of them (Home, Away and Alternative?). I suck at doing logos, so if anyone reading this would like to do logos for these, please feel free. Would Like drop shadow ones for each if possible. I will post one team per post. Ok, here we go: Portland Pioneers: Last edited by vulcan4; 03-04-2017 at 11:42 PM.

03-04-2017, 11:41 PM	#4
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	The Fourth team all I need is Arlington Rangers. I can use jerseys with 'Rangers' on them from the real Texas Rangers, but would like caps with an 'A' on it (the 'A' in the word TEXAS would be cool. Or the same font that is used on the Texas cap logo. Not sure what font that is) and some home/away/alternative jerseys with 'Arlington' on them. Thank you in Advance!! Last edited by vulcan4; 03-04-2017 at 11:47 PM.

03-06-2017, 02:26 PM	#5
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	I just did a Phoenix set by request... Here is the link, maybe you can use it... http://www.ootpdevelopments.com/boar...postcount=7446 __________________

03-07-2017, 03:32 PM	#8
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	Since it's the Texas Rangers, I will make you a set for them... __________________

03-07-2017, 04:00 PM	#10
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	The font I will be using is called MLB Texas Rangers... That is the closest one you will probably find... __________________ Last edited by txranger; 03-07-2017 at 05:27 PM.

03-04-2017, 11:33 PM	#2
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	Las Vegas Golden Knights:

03-04-2017, 11:38 PM	#3
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	Phoenix Diamondbacks (I have downloaded 1 cap and one jersey that has Phoenix and a 'P' on it, but would like some custom/alternative jerseys and caps if possible) - I'll post the only cap I found on this forum, the other two logos I'd like on the jerseys and/or caps with some Phoenix jerseys:

03-07-2017, 03:06 PM	#7
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	I'm going to attempt to do a couple of these myself. I know there are a LOT of requests that are posted here and I'm basically adding to that pile, lol =/ . One day, I am hoping I'll be good enough to do requests like the Masters do here . So, that being said, could anyone tell me what font is used for the Texas Rangers? I want to re-name my MLB Universe Texas Rangers to the Arlington Rangers, so I would need the font for the 'A' for the cap and obviously for 'Arlington' on the jersey. Thank you all!!! And have a Blessed Day.

03-07-2017, 05:30 PM	#11
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	Arlington Rangers Arlington Rangers __________________ Last edited by txranger; 03-07-2017 at 05:34 PM.

03-07-2017, 06:10 PM	#12
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	Thank you Very Much, txranger. What more can one say anymore to those who put their own time and effort/work into someone elses interests. OOTP is certainly one of the best, if not 'the best', online communities out there. Perfect. One day soon I'll be able to pay it forward to someone else. I had started doing logos and jerseys about a yr or so ago and then had a severe PC crash and lost everything I had on those HDs. Nope....didn't back anything up and I learned the hard way. I had so much saved on that drive. I have three HDs now, lol. Two SSDs and one HHD. Thank you once again, txranger.

03-07-2017, 09:04 PM	#16
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	Ok, I've decided I'm going to attempt to do the 'easier' of the two (Portland Pioneers &/Or the Las Vegas Golden Knights) which in my opinion will be the Vegas Golden Knights. The one thing I am concerned that I might not be able to do is putting the letter 'G' with the letter 'K' for a jersey patch (on left of chest). I will use the swords or helmet as a patch on the chest since those are primary logos. I was choosing between this Las Vegas team or the other one that was in the running for the NHL expansion team the 'Black Knights'. I decided with the Golden Knights because of the colours (the off green shades and golden colours) and the name as it has 'Golden' in it. I'll post them as soon as I'm happy with them. I will also put up a few more requests this week as soon as my main PC is up and running (should be tomorrow) because I know for sure I wouldn't be able to do them myself. My problems mainly exist in making a logo or letter not look all 'pixelated' if that makes any sense. txrnger - lol, I'm not kidding....you and a few others around here are like celebrities to me, hahahaha. It's an honour having you do a uni set for me, my fellow OOTP'er .

03-07-2017, 09:09 PM	#17
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	Thank you, thank you very much... __________________

03-07-2017, 09:11 PM	#18
txranger Hall Of Famer Join Date: Dec 2008 Location: "Deep in the Heart Of" Posts: 8,324	If you have a font in mind for the Knights let me know or I can try and match it and make you a GK for the chest... I guessing you are using the colors in the logos posted above??? __________________

03-07-2017, 09:39 PM	#20
vulcan4 Major Leagues Join Date: Jun 2015 Posts: 352	Regarding the patch/lettering that would go on the left side of chest - Typically, how wide/high/low would that 'GK' (for example) go/be? That is another problem I have in regards to placement of such things.