eriqjaffe's 3D Stadiums

[Pappy709]

Originally Posted by eriqjaffe

HP Ballpark

A model converted from the 3D Warehouse. The original model by Jack U. can be found here:

https://3dwarehouse.sketchup.com/mod...-Stadium?hl=en

My conversion can be found here:

http://www.mediafire.com/file/z2i1lk...lpark.zip/file

I would like to use this without the trident symbols. How can I remove them?

[eriqjaffe]

Originally Posted by Pappy709

I would like to use this without the trident symbols. How can I remove them?

You didn't see this, did you?

Originally Posted by eriqjaffe

Because it was fairly easy, I went ahead and fixed up HP Park so that the trident branding is more easily editable - just go into the textures folder and you can modify the images in there with whatever image editor you have available.

While I was at it, I updated the cameras and added a live scoreboard for OOTP26, just because

I guess what I didn't say explicitly was that you'd need to replace the model with the new one.

[Pappy709]

Thank you

[eriqjaffe]

Montgomery Riverwalk Stadium, home of the Montgomery Biscuits

Opened in 2004, the 7,000 seat park is partially converted from the old Montgomery Union Station and Trainshed, which stopped being used for rail service in 1979. Gates, amenities, and even luxury suites along the first-base line are built into the former shed building.

https://www.mediafire.com/file/1d9kg...adium.zip/file

[micropterus58]

Another beautiful stadium. That RF wall must give outfielders nightmares.

[johndoe8865]

Mr. Jaffe,

Have you, or would you, ever consider doing a very historic park, that used to be an affiliated rookie ball stadium until the 2021 MiLB realignment?

https://www.milb.com/pulaski/ballpark

It's now called Motor Mile Field at Calfee Park and it's in a tiny town in Virginia called Pulaski.

It was built in 1935 as a Works Progress Administration project, and is listed on the National Register of Historic Places.

https://en.wikipedia.org/wiki/Calfee_Park

The Pulaski "River Turtles" - a summer collegiate baseball team still play there in 2025. I've been to the stadium and it is very unique.

I'm sure there are much better pictures and I may have some myself from going to the park if you are interested. If not, do you think anyone else would be interested in trying it?

https://en.wikipedia.org/wiki/Pulaski_River_Turtles


Here is the original stone entrance -



Here is the "mini-monster" in RF -



Left Center Field to Center Field when it was still an NY Yankees affiliate -



Behind the batter's box -




Panoramic View of the Whole Field -

[84Cubs]

-

[rogue1227]

Originally Posted by eriqjaffe

People have asked if it exists, and now it does.

George M. Steinbrenner Field, (interim) home of the Tampa Bay Rays

Opened in 1996 as Legends Field, Steinbrenner Field has a capacity of 11,026, making it not only the largest park in the Florida State League but also the largest Spring Training park in Florida.

After Hurricane Milton destroyed the roof and flooded Tropicana Field, the Yankees allowed the Rays to use Steinbrenner Field as a temporary home field for the 2025 season (and, allegedly, only the 2025 season).

This version shows the branding and advertisements as they existed on Opening Day 2025, or at least as close as I could get.

https://www.mediafire.com/file/ske5y...%2529.zip/file

And, if I did it right (it's been a while), this is also available on the Steam Workshop: https://steamcommunity.com/sharedfil...?id=3460363167

Do you happen to have a version of this that's got the usual Yankees/Tarpons branding on it? So I can use it for regular Spring Training and such.

[ashry1599]

can you make a 3d model with dynamic scoreboard of all the single a parks

[willboat75]

Hey Eriq,

Any hope for updating the USBL ballparks to have the active scoreboard? I'd like to make the quickstart again for OOTP 27.

[Pappy709]

Originally Posted by willboat75

Hey Eriq,

Any hope for updating the USBL ballparks to have the active scoreboard? I'd like to make the quickstart again for OOTP 27.

Would love this:-)

[matttb324]

These parks are awesome and I'd like to use a few. Are there versions without the team branding, such as on the field, dugout roofs etc?

[eriqjaffe]

Originally Posted by matttb324

These parks are awesome and I'd like to use a few. Are there versions without the team branding, such as on the field, dugout roofs etc?

The models are as you see them here. I have not made unbranded versions of any of the minor-league parks that I have made.

That being said, most of the artwork can be edited using Photoshop or the like. Just find the image in the textures folder and modify it as you see fit.

There are other elements which require editing and re-exporting the model with SketchUp, but it can be done.

[matttb324]

Ah okay no problem, I will make them work. Great parks!

[PseudoChris]

I’m not sure if this is the right thread for this question, but how do you get such high quality images for ads or logos within ballparks? I’m dipping my toe into Sketchup modeling but this one is stumping me.

[eriqjaffe]

Originally Posted by PseudoChris

I’m not sure if this is the right thread for this question, but how do you get such high quality images for ads or logos within ballparks? I’m dipping my toe into Sketchup modeling but this one is stumping me.

I'm good at Googling things

[drummerJ99]

I'm pretty lost when it comes to stadium stuff. But I downloaded and am using the Albert K. Ellefson Stadium for my Indiana Tribe USBL franchise since I hate domes. LOL


Anyway is there anyway to add team branding to the stadium? I was able to change the dugout logos by replacing the budweiser with logos of same size. But I can't seem to figure out how to add logo to the field or outfield grass.


I'm very new to blender and even opened it in there. But extremely lost on how to even attempt to add logo to the field.

[Braden]

Originally Posted by eriqjaffe

I'm good at Googling things

I am trying convert a SketchUp to blender by following your instructions but when I pick a mesh and open it in Outliner, I cannot find the outliner anywhere on the blender screen.

Thanks for doing this conversion video and you help.

Braden

I see now that it outlined the entire model and not just the mesh I selected.

[Deft]

Originally Posted by Braden

I am trying convert a SketchUp to blender by following your instructions but when I pick a mesh and open it in Outliner, I cannot find the outliner anywhere on the blender screen.

Thanks for doing this conversion video and you help.

Braden

You can pull down the paint tab in the UV Editor window to see the UV mesh.

[Braden]

Are any of these parks in Blender converted from Sketchup? If so, which ones?