Inventory of 3D Ballparks by Silvam14 and Adion

[Humboldt KA]

Originally Posted by Braden

From the mods, 3dModels. silva @ adioin

Pretty sure that's the same file set. Same version # (1.4) and same size exactly. And fails in the same way.

[Braden]

Originally Posted by Humboldt KA

Pretty sure that's the same file set. Same version # (1.4) and same size exactly. And fails in the same way.

All the models are in his OOTP26.zip file on this page

https://forums.ootpdevelopments.com/...d.php?t=287547

[Humboldt KA]

Originally Posted by Braden

All the models are in his OOTP26.zip file on this page

https://forums.ootpdevelopments.com/...d.php?t=287547

I think that may be the same set again. Still says version 1.4 and the byte count remains the same. I have now downloaded Wrigley 1928-1937 from 5 different locations. All show the same version # (1.4) and all but one the same byte count (13,118,222; one, the 2nd one I tried, shows 19,362,703).

All fail in the same way: a few seconds of crowd noise, then CTD.

In 16 years of play from 1919 to 1934, I have now tried 28 sets of park files (18 NL--including Wrigley 1938-1978--and 10 AL). All work except Wrigley 1928-1937.

For this reason I doubt that the problem is my copy of OOTP or my OS.

Do Silvam14 or Adion monitor this forum? Maybe one of them can shed some light.

Thanks.

[Braden]

Originally Posted by Humboldt KA

I think that may be the same set again. Still says version 1.4 and the byte count remains the same. I have now downloaded Wrigley 1928-1937 from 5 different locations. All show the same version # (1.4) and all but one the same byte count (13,118,222; one, the 2nd one I tried, shows 19,362,703).

All fail in the same way: a few seconds of crowd noise, then CTD.

In 16 years of play from 1919 to 1934, I have now tried 28 sets of park files (18 NL--including Wrigley 1938-1978--and 10 AL). All work except Wrigley 1928-1937.

For this reason I doubt that the problem is my copy of OOTP or my OS.

Do Silvam14 or Adion monitor this forum? Maybe one of them can shed some light.

Thanks.

None of the parks in this set below have version numbers, e.d. 1.4. So, I don't what your are talking about and yes, both monitor.


https://www.mediafire.com/file_premi...OTP26.zip/file

[Humboldt KA]

Braden,

Thanks for quick reply.

This link which you sent me on 02/11/2026 https://forums.ootpdevelopments.com/...d.php?t=287547 includes the mediafire link--which yields error 404--and, just below, a set of links to ballpark models, which are accessible. I assumed that meant the contents were the same. In that list, the name of the Wrigley 1928-1937 .zip file ends with " 1_4."

The mediafire link which you just posted appears to be the same one. Error 404.

[Braden]

Originally Posted by Humboldt KA

Braden,

Thanks for quick reply.

This link which you sent me on 02/11/2026 https://forums.ootpdevelopments.com/...d.php?t=287547 includes the mediafire link--which yields error 404--and, just below, a set of links to ballpark models, which are accessible. I assumed that meant the contents were the same. In that list, the name of the Wrigley 1928-1937 .zip file ends with " 1_4."

The mediafire link which you just posted appears to be the same one. Error 404.

It did the same for me, I guess copy&pasting to here did not work. It works file from Silvam's mods page.

[Humboldt KA]

Do you mean this page?

https://forums.ootpdevelopments.com/...d.php?t=287547

Succeeded in downloading that .zip file. But I'm not currently visiting the Cubs, so AFAIK I can't test loading that park until I get that far, which will take several days. Is there a way?

I did succeed in creating a 1-game exhibition using the 1928 Cubs as the home team. But there does not seem to be a way to change the park files. When I tried to play it with whatever version of Wrigley 1928 it already had, it crashed in the same way as all previous attempts.

[Braden]

Originally Posted by Humboldt KA

Do you mean this page?

https://forums.ootpdevelopments.com/...d.php?t=287547

Succeeded in downloading that .zip file. But I'm not currently visiting the Cubs, so AFAIK I can't test loading that park until I get that far, which will take several days. Is there a way?

I did succeed in creating a 1-game exhibition using the 1928 Cubs as the home team. But there does not seem to be a way to change the park files. When I tried to play it with whatever version of Wrigley 1928 it already had, it crashed in the same way as all previous attempts.

Whatever season you are in, you can look/load each park by clicking on the MLB (or whatever is the name for your game, and select settings then select edit ballparks and you can select the park for each team.

[Humboldt KA]

Originally Posted by Braden

Whatever season you are in, you can look/load each park by clicking on the MLB (or whatever is the name for your game, and select settings then select edit ballparks and you can select the park for each team.

Yes, but AFAIK I can't test whether it works except when my team is playing a game there. That was my question: is there a way?

[Humboldt KA]

Originally Posted by Braden

Whatever season you are in, you can look/load each park by clicking on the MLB (or whatever is the name for your game, and select settings then select edit ballparks and you can select the park for each team.

Yes, but AFAIK I can't test whether it works except when my team is playing a game there. That was my question: is there a way?

[Braden]

Originally Posted by Humboldt KA

Yes, but AFAIK I can't test whether it works except when my team is playing a game there. That was my question: is there a way?

What is AFAIK?

[LansdowneSt]

As far as I know is AFAIK

[myer_za]

A very humble request for the new Busch Stadium, PNC Park and Great American Ballpark. Thank you so much for all your work on these! You all are legends

[gdenn24]

I have downloaded Mike Silvam's historical ballparks. Now how do I get them into OOTP26 ballpark models folder? … I tried drag and drop like Mike did in his video, but that didn't work. Then, how do I load a historical stadium into a OOTP26 game? I'm not very technically adept, so I need step-by-step instructions. Thnx

[Humboldt KA]

Originally Posted by gdenn24

I have downloaded Mike Silvam's historical ballparks. Now how do I get them into OOTP26 ballpark models folder? … I tried drag and drop like Mike did in his video, but that didn't work. Then, how do I load a historical stadium into a OOTP26 game? I'm not very technically adept, so I need step-by-step instructions. Thnx

Drag and drop the directory for the ballpark you want into the game's 'models' folder. Then, in game, go to that team and choose 'settings,' then 'edit ballpark,' then 'manually import from file.' Use the drop down menu to navigate to the directory you want (you may have to use the 'up' button to get to the list). Select the .prk file and load it. Say no to 'keep park factors?'.

[Humboldt KA]

Originally Posted by Braden

It did the same for me, I guess copy&pasting to here did not work. It works file from Silvam's mods page.

Was finally visiting the Cubs and able to test the park files from that page. I can see Wrigley 1928-1937 is not the same as ones I tested earlier b/c the byte count is not the same. But this one too fails in the same way as the others.

[Toddster]

Hi all, forgive me if: a) this is a really stupid 'user error' question; b) has already been asked and answered somewhere; or c) both.

I keep getting a black infield on-screen in Modern 3D game mode when using the historic parks, instead of brown dirt. Is there anything I can do about that?

Thanks for all the fantastic work putting these parks together!!!

[Braden]

As you see the one tree is black out. I and Grandpa tried to fix it in Sketchup but could not get anything to work. Also, OBJexporter.rb does not show up on my Sketchup screen and we don't remember where to put it to show up.

Thanks,
Braden

[Braden]

Originally Posted by Braden

As you see the one tree is black out. I and Grandpa tried to fix it in Sketchup but could not get anything to work. Also, OBJexporter.rb does not show up on my Sketchup screen and we don't remember where to put it to show up.

Thanks,
Braden

Never mind. Grandpa remembered exporter file goes and we fixed it.