Silvam's parks with background and 3D crowd - Page 20

adion · 04-05-2017, 06:14 PM

Quote:

Originally Posted by silvam14

The only thing I can think of for you to check is to look in sketchup st the ones that are problems and see where the axis is set to. Sometime when flipping faces, you can inadvertently set the axis to somewhere other than home plate. I think this could cause an issue. Give it a look

Sent from my iPhone using Tapatalk

I just checked in Sketchup. The axes is where it should be

I found the problem (I hope). The infield base path dirt is floating above the grass. It is kind of difficult to see in the picture but it is. I went back to your original Fenway 1970 and it is not like that. Something must have happened when I was putting the background on it. I am going to re-do it and see what happens.

robedits · 04-05-2017, 06:23 PM

Adion...first I wish to thank you and silvam for all your terrific work on the historical ballparks. I tried myself to get the Historical Fenway re-adjusted to make the outfielders play in the outfield and not behind the fences (which is I guess a result of the fence grid being too far back?).
While I was able to re-align the somewhat off-to-the-right grid (where the pitchers mound was to the right of the actual mound,etc), by reading the somewhat obtuse online manual OOTP provides...I was completely unable to figure out how to re-adjust the fence grid (even when following the instructions). Thus, my OFers at historical Fenway 1975 are still playing "over the walls",in the stands,etc.
If and when you get the chance to revise Historical Fenway, I also am not sure how to get it to work. With OOTP17, I simply dragged your BP folder to the ballpark/models folder in the game.
It doesn't work that way with OOTP18; I'm not at all sure why (I tried doing that with another ballpark).
So...would you be a good friend and let this 3D model-idiot know how to GET your revised Historical ballpark working with OOTP18?
As always,your hard work is appreciated. You've made this great game even MORE fun to play.
So...

adion · 04-05-2017, 06:38 PM

Quote:

Originally Posted by robedits

Adion...first I wish to thank you and silvam for all your terrific work on the historical ballparks. I tried myself to get the Historical Fenway re-adjusted to make the outfielders play in the outfield and not behind the fences (which is I guess a result of the fence grid being too far back?).
While I was able to re-align the somewhat off-to-the-right grid (where the pitchers mound was to the right of the actual mound,etc), by reading the somewhat obtuse online manual OOTP provides...I was completely unable to figure out how to re-adjust the fence grid (even when following the instructions). Thus, my OFers at historical Fenway 1975 are still playing "over the walls",in the stands,etc.
If and when you get the chance to revise Historical Fenway, I also am not sure how to get it to work. With OOTP17, I simply dragged your BP folder to the ballpark/models folder in the game.
It doesn't work that way with OOTP18; I'm not at all sure why (I tried doing that with another ballpark).
So...would you be a good friend and let this 3D model-idiot know how to GET your revised Historical ballpark working with OOTP18?
As always,your hard work is appreciated. You've made this great game even MORE fun to play.
So...

I think I found the problem. I am working on fixing now.

robedits · 04-05-2017, 06:48 PM

Thanks much. Will check mediafire again periodically when I get home from work tomorrow night, and after.

adion · 04-05-2017, 08:25 PM

Quote:

Originally Posted by robedits

Thanks much. Will check mediafire again periodically when I get home from work tomorrow night, and after.

It is fixed and it is uploaded

https://www.mediafire.com/folder/1ut...s_and_3D_crowd

zappa1 · 04-05-2017, 11:31 PM

Quote:

Originally Posted by adion

Did the grid fit in all ways including by the walls and flush with the field when you got it work? I tried many time clicking on HP and the bases but never got a dot. When I did this in 17 it worked.

No it did not. After you mentioned it, I went back and checked. The grid was ok, but the the walls all needed to be adjusted. By the time I finished it you had the new park ready. I never did bother to check if it worked or not since I saw you had the new one ready. It was a bit of a pain trying to find all the fence markers. And I don't know if I even got them all. Rightfield was the hardest to find them. Thanks for fixing the park.

Your updated park works well now. Just played a few games on it. Thanks again.

adion · 04-06-2017, 02:16 PM

Here is Silvam's Civic Stadium, Eugene, OR with background and 3D Crowd.

https://www.mediafire.com/folder/1ut...s_and_3D_crowd

robedits · 04-06-2017, 06:20 PM

It works like a charm and I'm grateful. I DO have one more question,though:
The previous incantation of historical fenway (the one you revised and fixed the grid,wall position,etc) had advertising on the wall for Fenway 1970-87. This one does NOT, even though everything else is fixed.
Am I supposed to load the "ads" in from somewhere else? I simply d-loaded your revised 1970-87 fenway, unzipped it and put it in the models folder for OOTP18. Opened up boston edit settings, loaded new 3D model, and directed to your revised folder and replaced the .obj.
So,like I said: stadium works. But no ads. Not sure if I did something wrong or am missing a step.
Thank you kindly.

zappa1 · 04-06-2017, 06:28 PM

Civic Stadium was a nice little park. Too bad what's happened to it.

On June 29, 2015, Civic Stadium was destroyed by fire. Two days later, officials charged four pre-teen boys in connection with the fire, although the cause had not yet been determined conclusively. The stadium was delisted from the National Register of Historic Places on March 8, 2016.

adion · 04-06-2017, 06:58 PM

Quote:

Originally Posted by zappa1

Civic Stadium was a nice little park. Too bad what's happened to it.

On June 29, 2015, Civic Stadium was destroyed by fire. Two days later, officials charged four pre-teen boys in connection with the fire, although the cause had not yet been determined conclusively. The stadium was delisted from the National Register of Historic Places on March 8, 2016.

What a shame.

doors11 · 04-06-2017, 07:46 PM

Thank You for Your Version Of Civic Stadium. I spend alot of hours there watching the Ems. Thanks for putting this in the game i play so much. This is very Kind of you Two guys

adion · 04-06-2017, 09:38 PM

Quote:

Originally Posted by doors11

Thank You for Your Version Of Civic Stadium. I spend alot of hours there watching the Ems. Thanks for putting this in the game i play so much. This is very Kind of you Two guys

Isn't that where the Bing Russell's Mavericks Played and, if so, did you ever see any of there games.

silvam14 · 04-06-2017, 09:57 PM

Quote:

Originally Posted by zappa1

Civic Stadium was a nice little park. Too bad what's happened to it.

On June 29, 2015, Civic Stadium was destroyed by fire. Two days later, officials charged four pre-teen boys in connection with the fire, although the cause had not yet been determined conclusively. The stadium was delisted from the National Register of Historic Places on March 8, 2016.

Just doing my part to keep the memory alive. Haha

Sent from my iPhone using Tapatalk

zappa1 · 04-06-2017, 10:11 PM

Quote:

Originally Posted by silvam14

Just doing my part to keep the memory alive. Haha

Sent from my iPhone using Tapatalk

Pre-teens? My word, what were they thinking? Guess they weren't.

zappa1 · 04-06-2017, 10:19 PM

Quote:

Originally Posted by adion

Isn't that where the Bing Russell's Mavericks Played and, if so, did you ever see any of there games.

The Portland Mavericks did play there from 1973-1977. Won 4 division titles. Missed in 1974.

doors11 · 04-06-2017, 10:29 PM

I only watched AAA Em's with all those Phillies Greats from 1969 to 1974

ECrane67 · 04-07-2017, 12:39 AM

I'm sure I'm doing something wrong. I've downloaded some of the ball parks, but when I try extracting them, first of all I can't reach the "Models" folder and second, I'm told that the output file doesn't exist--any advice help etc would be most appreciated

adion · 04-07-2017, 07:29 AM

[QUOTE=ECrane67;4182944]I'm sure I'm doing something wrong. I've downloaded some of the ball parks, but when I try extracting them, first of all I can't reach the "Models" folder and second, I'm told that the output file doesn't exist--any advice help etc would be most appreciated[/QUOTE

First off, I don't understand "I can't reach the "Models" folder". I don't know what that means. Try unzipping the file to your desktop and then just copy or move it to the Models folder in OOTP 18 (or 17) whichever you have.

adion · 04-07-2017, 07:30 AM

Quote:

Originally Posted by zappa1

The Portland Mavericks did play there from 1973-1977. Won 4 division titles. Missed in 1974.

Have you seen the film about the team? It is called the Battered Bastards of Baseball. It is good.

zappa1 · 04-07-2017, 08:41 AM

Quote:

Originally Posted by doors11

I only watched AAA Em's with all those Phillies Greats from 1969 to 1974

As a Phillies fan, I do remember it very well.

04-05-2017, 06:23 PM	#382
robedits Minors (Triple A) Join Date: May 2016 Location: NYC Posts: 255	WOUld you be kind enough to let us know when historical fenway if fixed? Adion...first I wish to thank you and silvam for all your terrific work on the historical ballparks. I tried myself to get the Historical Fenway re-adjusted to make the outfielders play in the outfield and not behind the fences (which is I guess a result of the fence grid being too far back?). While I was able to re-align the somewhat off-to-the-right grid (where the pitchers mound was to the right of the actual mound,etc), by reading the somewhat obtuse online manual OOTP provides...I was completely unable to figure out how to re-adjust the fence grid (even when following the instructions). Thus, my OFers at historical Fenway 1975 are still playing "over the walls",in the stands,etc. If and when you get the chance to revise Historical Fenway, I also am not sure how to get it to work. With OOTP17, I simply dragged your BP folder to the ballpark/models folder in the game. It doesn't work that way with OOTP18; I'm not at all sure why (I tried doing that with another ballpark). So...would you be a good friend and let this 3D model-idiot know how to GET your revised Historical ballpark working with OOTP18? As always,your hard work is appreciated. You've made this great game even MORE fun to play. So... Last edited by robedits; 04-05-2017 at 06:24 PM.

04-06-2017, 02:16 PM	#387
adion All Star Starter Join Date: Apr 2006 Posts: 1,376	Civic Stadium Here is Silvam's Civic Stadium, Eugene, OR with background and 3D Crowd. https://www.mediafire.com/folder/1ut...s_and_3D_crowd Attached Images

04-06-2017, 06:20 PM	#388
robedits Minors (Triple A) Join Date: May 2016 Location: NYC Posts: 255	thansk you for fixing historical fenway,adion It works like a charm and I'm grateful. I DO have one more question,though: The previous incantation of historical fenway (the one you revised and fixed the grid,wall position,etc) had advertising on the wall for Fenway 1970-87. This one does NOT, even though everything else is fixed. Am I supposed to load the "ads" in from somewhere else? I simply d-loaded your revised 1970-87 fenway, unzipped it and put it in the models folder for OOTP18. Opened up boston edit settings, loaded new 3D model, and directed to your revised folder and replaced the .obj. So,like I said: stadium works. But no ads. Not sure if I did something wrong or am missing a step. Thank you kindly.

04-07-2017, 12:39 AM	#397
ECrane67 Minors (Rookie Ball) Join Date: May 2005 Posts: 33	Help! I'm sure I'm doing something wrong. I've downloaded some of the ball parks, but when I try extracting them, first of all I can't reach the "Models" folder and second, I'm told that the output file doesn't exist--any advice help etc would be most appreciated

04-05-2017, 06:48 PM	#384
robedits Minors (Triple A) Join Date: May 2016 Location: NYC Posts: 255	Thanks much. Will check mediafire again periodically when I get home from work tomorrow night, and after.

04-06-2017, 06:28 PM	#389
zappa1 Hall Of Famer Join Date: Apr 2012 Location: Pennsylvania Posts: 2,115	Civic Stadium was a nice little park. Too bad what's happened to it. On June 29, 2015, Civic Stadium was destroyed by fire. Two days later, officials charged four pre-teen boys in connection with the fire, although the cause had not yet been determined conclusively. The stadium was delisted from the National Register of Historic Places on March 8, 2016.

04-06-2017, 07:46 PM	#391
doors11 All Star Reserve Join Date: Jan 2003 Location: Creswell Posts: 633	Thank You for Your Version Of Civic Stadium. I spend alot of hours there watching the Ems. Thanks for putting this in the game i play so much. This is very Kind of you Two guys

04-06-2017, 10:29 PM	#396
doors11 All Star Reserve Join Date: Jan 2003 Location: Creswell Posts: 633	I only watched AAA Em's with all those Phillies Greats from 1969 to 1974

04-07-2017, 07:29 AM	#398
adion All Star Starter Join Date: Apr 2006 Posts: 1,376	[QUOTE=ECrane67;4182944]I'm sure I'm doing something wrong. I've downloaded some of the ball parks, but when I try extracting them, first of all I can't reach the "Models" folder and second, I'm told that the output file doesn't exist--any advice help etc would be most appreciated[/QUOTE First off, I don't understand "I can't reach the "Models" folder". I don't know what that means. Try unzipping the file to your desktop and then just copy or move it to the Models folder in OOTP 18 (or 17) whichever you have.