Custom Views

AlpineSK · 06-29-2017, 04:06 PM

What does everyone use for Custom Views? I've set up a series of Sabermetric driven views that I found from a few hitter/pitcher/fielder Sabermetric articles but I'm always looking for new ideas..

Sabermetric Hitting Stats: https://www.beyondtheboxscore.com/20...n-sabermetrics

Sabermetric Pitching Stats: https://www.beyondtheboxscore.com/20...n-sabermetrics

DawnBTVS · 06-29-2017, 07:12 PM

My Hitting = G/PA/H/1B/2B/3B/HR/RBI/R/BB/IBB/HBP/K/GIDP/BA/OBP/SLG/RC/OPS+/wRAA/WAR/SB/CS/BatR/BsR

I like Batting Runs and Base Runs because it denotes whether a player is particularly great offensively or on the base paths.

My Pitching = GS/W/L/SV/IP/BF/HRA/BB/K/ERA/OBP/K to BB/R (Brian Kenny Special~!)/CG/FIP/FIP-/ WAR

I like the Runs Allowed because it better showcases how a pitcher is by including Unearned Runs. Same for including OBP rather than just ERA as it lets me know if a guy is allowing a lot of hits despite a great FIP or if he's allowing a lot of hits and struggling with walks too.

gRaider2001 · 06-30-2017, 12:00 AM

http://www.ootpdevelopments.com/boar...d.php?t=256802

Link is from a couple of versions ago, but it might give you some ideas!

22tbrads22 · 06-30-2017, 01:06 AM

**** ive been trying to do this, how do you set your custom views I cant even find those stats when I go to custom views?

NoOne · 06-30-2017, 12:20 PM

click view, add or create etc [sic] .. for exact syntax check manual, lol... now, once that window pops open, you can select various tabs labeled with various categories of info... should be able to figure it out from there. when done, click okay, then save the view if you like it.

i use a custom view for:

2 views for potential pitching/batting (draft / trade targets etc)
2 more similar views for current ability of batting/pitching (trade targets, FA searching, setting up MiL etc)

i could fit batting and pitching in one screen, but i never look at a pool of players in that way, anyway. plus, much easier to read to keep it simple and relevant to the decision at hand.

i have various filters that i will apply too.. some specifically for a custom view, even if the filter isn't always in use.

i have ratings on, so i don't look at stats much unless they are underperforming. if i did that more, i'd probably set up some custom views for pitching/batting stats, too. i'd avoid the 'conglomerate' stats like ops+/WAR in lieau of k/9 bb/9 etc .. rates that i can compare easily and define the more basic aspects of what is happening. i do like ops+... but... it's better for comparing a career than a single season. it'd be visible but limited use. (war sucks

maybe that's an acronym maybe it's not)

I make one anytime a behaviour is often enough and causes me to search for the same set of information each time... = perfect for custom view

mix/match with filters, too

edit: when i get around to it i want to change the default views a bit... e.g. "demand" added to "Default" and removing useless stuff like jersey #

06-29-2017, 04:06 PM	#1
AlpineSK All Star Starter Join Date: Mar 2003 Location: Bear, DE Posts: 1,618	Custom Views What does everyone use for Custom Views? I've set up a series of Sabermetric driven views that I found from a few hitter/pitcher/fielder Sabermetric articles but I'm always looking for new ideas.. Sabermetric Hitting Stats: https://www.beyondtheboxscore.com/20...n-sabermetrics Sabermetric Pitching Stats: https://www.beyondtheboxscore.com/20...n-sabermetrics __________________ Check out my Sims!! 2013 Boston Red Sox Or my blogs: http://www.medicsbk.com The Sports Medic

06-29-2017, 07:12 PM	#2
DawnBTVS Major Leagues Join Date: Nov 2003 Location: USA Posts: 416	My Hitting = G/PA/H/1B/2B/3B/HR/RBI/R/BB/IBB/HBP/K/GIDP/BA/OBP/SLG/RC/OPS+/wRAA/WAR/SB/CS/BatR/BsR I like Batting Runs and Base Runs because it denotes whether a player is particularly great offensively or on the base paths. My Pitching = GS/W/L/SV/IP/BF/HRA/BB/K/ERA/OBP/K to BB/R (Brian Kenny Special~!)/CG/FIP/FIP-/ WAR I like the Runs Allowed because it better showcases how a pitcher is by including Unearned Runs. Same for including OBP rather than just ERA as it lets me know if a guy is allowing a lot of hits despite a great FIP or if he's allowing a lot of hits and struggling with walks too. Last edited by DawnBTVS; 06-30-2017 at 01:31 PM.

06-30-2017, 12:00 AM	#3
gRaider2001 Minors (Triple A) Join Date: Dec 2013 Location: Ohio Posts: 224	http://www.ootpdevelopments.com/boar...d.php?t=256802 Link is from a couple of versions ago, but it might give you some ideas! __________________ Looking For Hints and Tips for OOTP 15 or Baseball in General? Please Check Out The Knowledge Thread Link Below: http://www.ootpdevelopments.com/boar...ge-thread.html

06-30-2017, 12:20 PM	#5
NoOne Hall Of Famer Join Date: Apr 2015 Posts: 7,167	click view, add or create etc [sic] .. for exact syntax check manual, lol... now, once that window pops open, you can select various tabs labeled with various categories of info... should be able to figure it out from there. when done, click okay, then save the view if you like it. i use a custom view for: 2 views for potential pitching/batting (draft / trade targets etc) 2 more similar views for current ability of batting/pitching (trade targets, FA searching, setting up MiL etc) i could fit batting and pitching in one screen, but i never look at a pool of players in that way, anyway. plus, much easier to read to keep it simple and relevant to the decision at hand. i have various filters that i will apply too.. some specifically for a custom view, even if the filter isn't always in use. i have ratings on, so i don't look at stats much unless they are underperforming. if i did that more, i'd probably set up some custom views for pitching/batting stats, too. i'd avoid the 'conglomerate' stats like ops+/WAR in lieau of k/9 bb/9 etc .. rates that i can compare easily and define the more basic aspects of what is happening. i do like ops+... but... it's better for comparing a career than a single season. it'd be visible but limited use. (war sucks maybe that's an acronym maybe it's not) I make one anytime a behaviour is often enough and causes me to search for the same set of information each time... = perfect for custom view mix/match with filters, too edit: when i get around to it i want to change the default views a bit... e.g. "demand" added to "Default" and removing useless stuff like jersey # Last edited by NoOne; 06-30-2017 at 12:30 PM.

06-30-2017, 01:06 AM	#4
22tbrads22 Minors (Double A) Join Date: Aug 2016 Posts: 140	**** ive been trying to do this, how do you set your custom views I cant even find those stats when I go to custom views?