Inventory of 3D Ballparks by Silvam14 and Adion

[silvam14]

Originally Posted by airgordon

Silvam,

As far as I can see there is no "models" folder in my OOTP20 file directory like there was in OOTP19. Just a ballparks folder, that is where all the ballpark files are.

Gordon

Since I don’t have a Mac, I don’t know what else to tell ya except to maybe try the thread where you post issues


Sent from my iPhone using Tapatalk

[Scott Vibert]

There's a models folder on the Mac
/users/$USERNAME/Library/Application Support/Out of the Park Developments/OOTP Baseball 20/ballparks/models

[adion]

In case any one is interested, I took all of Slivam's great Shibe parks and divided them up between AL & NL (A's and Phillies) by adding the respective logos some where around the scoreboard. The logos are kind of had to see in the these pictures but more obvious in the game.They are uploaded at the below address. I did not overwrite the ones that were there. The ones I did are date 2019/04/02.

http://www.mediafire.com/folder/akd2ejkdtk4dx/Historic

[chaz]

Any chance you could create a model of the new Rangers Ballpark Globe Life Field?

Here are the renderings: https://www.mlb.com/rangers/ballpark...e-field/photos

[adion]

Originally Posted by chaz

Any chance you could create a model of the new Rangers Ballpark Globe Life Field?

Here are the renderings: https://www.mlb.com/rangers/ballpark...e-field/photos

Since OOTP does the current parks,I would think they would make this park sometime after it actually opens. It will probably not happen until OOTP21 but that is just my thought.

[silvam14]

Originally Posted by chaz

Any chance you could create a model of the new Rangers Ballpark Globe Life Field?

Here are the renderings: https://www.mlb.com/rangers/ballpark...e-field/photos

I mad a suntrust park before it actually opened but I would want some kind of seating diagram if I were to attempt the new globe life. Not on my list of to do items at the moment


Sent from my iPhone using Tapatalk

[itsmb8]

Originally Posted by itsmb8

Hey silvam. Would you be able to make TD Ameritrade's field one texture? I was planning on downloading it and modding the field for the "MLB in Omaha" game but my method wont work if its tiled.

just in case you mightve missed this. Also, if you would be able to do this for Tokyo Dome as well for the MLB Opening Series.

[silvam14]

Originally Posted by itsmb8

just in case you mightve missed this. Also, if you would be able to do this for Tokyo Dome as well for the MLB Opening Series.

Not quite sure what you mean. My field contains many textures. The grass/warning track is one texture with the infield/foul lines sitting on top.

Perhaps eriqjaffe or Nielson could do that.


Sent from my iPhone using Tapatalk

[zappa1]

Originally Posted by adion

In case any one is interested, I took all of Slivam's great Shibe parks and divided them up between AL & NL (A's and Phillies) by adding the respective logos some where around the scoreboard. The logos are kind of had to see in the these pictures but more obvious in the game.They are uploaded at the below address. I did not overwrite the ones that were there. The ones I did are date 2019/04/02.

http://www.mediafire.com/folder/akd2ejkdtk4dx/Historic

Sportsmans Park could use the same treatment with the Cards & Browns.

[chaz]

Originally Posted by silvam14

I mad a suntrust park before it actually opened but I would want some kind of seating diagram if I were to attempt the new globe life.


Sent from my iPhone using Tapatalk

Here's the seating chart: https://www.reddit.com/r/TexasRanger...season_ticket/

[adion]

Originally Posted by zappa1

Sportsmans Park could use the same treatment with the Cards & Browns.

I think I may have done that. I will look at it.

[itsmb8]

Originally Posted by silvam14

Not quite sure what you mean. My field contains many textures. The grass/warning track is one texture with the infield/foul lines sitting on top.

Perhaps eriqjaffe or Nielson could do that.


Sent from my iPhone using Tapatalk

What i mean is I personally would like the entire field as one texture, not sure if you would mind doing that or not.

I mean i was wondering if you could make the entire playing surface one texture. What i noticed when looking at those two models is that you used one texture for grass and another for the dirt, so in order to put logos onto the field, you would have to paste another texture layer onto the field in sketchup, which i cannot do.

Basically what im asking is if you could make the field texture look like this:

[adion]

I have update all of these parks with sign logos for each team. I think I did some of these before but didn't upload them. I replaced the ones it the file with these.

Here is the link: http://www.mediafire.com/folder/akd2ejkdtk4dx/Historic

[drksd4848]

Originally Posted by itsmb8

What i mean is I personally would like the entire field as one texture, not sure if you would mind doing that or not.

I mean i was wondering if you could make the entire playing surface one texture. What i noticed when looking at those two models is that you used one texture for grass and another for the dirt, so in order to put logos onto the field, you would have to paste another texture layer onto the field in sketchup, which i cannot do.

Basically what im asking is if you could make the field texture look like this:

Not so easy. If I understand process with the way Silva does it, he uses texture "squares" to "paint" the grass onto the surface. The the individual squares fit nicely together to look like a solid field. You cant just plop an entire field pic on the model with that method.


Now, I think Eriq does it a little differently, where he uses an entire image as the field.


At least I *think* that's how they do it.

[itsmb8]

Originally Posted by drksd4848

Not so easy. If I understand process with the way Silva does it, he uses texture "squares" to "paint" the grass onto the surface. The the individual squares fit nicely together to look like a solid field. You cant just plop an entire field pic on the model with that method.


Now, I think Eriq does it a little differently, where he uses an entire image as the field.


At least I *think* that's how they do it.

Thats all im requesting, if he (or anyone tbh) could convert the field to just one image. Even if just the grass was just one image. The reason why is because when its tiled together, you cant put images onto the field without going into sketchup itself to do it.

If its too difficult ill just leave it, but i requested it because thats how the OOTP parks and Eriqjaffe models are done so I assumed it wouldnt be too difficult.

[the_mad_monk]

I've come across a few photos that show a few rows of bleachers below the LF wall. Both photos were identified from the 1912 (World Series) season.

[mmarra82]

Has anyone constructed the proposed A's waterfront stadium on the Howard Terminal?

[The Game]

Originally Posted by mmarra82

Has anyone constructed the proposed A's waterfront stadium on the Howard Terminal?

Eriqjaffe, perhaps? He has some concepts in his thread.

[nielsoncp]

Originally Posted by mmarra82

Has anyone constructed the proposed A's waterfront stadium on the Howard Terminal?

I have one in my ballparks thread. It's based on the old designs in November, so it's more boxy than the latest iteration.

[silvam14]

Round 3: I'm going to go through and add Entryways to the stands in the outfield to add a little more realism. Its not the most time efficient task, but I like how it makes the stadium a little more realistic

I've completed Anaheim and started on the Arlington Stadiums.

Hoping I can easily transfer these objects as a group for the stadiums that have multiple versions