Ised's Stadium Thread - Page 10

sdw1000 · 08-10-2022, 05:05 PM

Great job on the Cape Cod league ballparks, but it would've been helpful had you set the grid points.

Clovidequano Dovatha · 08-21-2022, 05:51 PM

Quote:

Originally Posted by Isedelyod

Another one I quickly modded from the 3DWarehouse. It's been awhile, but seemed to turn out okay.

Bible Hill Stadium showing as pretty much all black under the 3d Model tab when in OOTP 22, at least for me, for some reason, without me doing anything at all, except for trying to load the model properly and all, of course, Isedelyod. Don't know why, unfortunately. Any suggestions? Please advise. Thank you. CD out.

The Game · 08-31-2022, 02:15 PM

Quote:

Originally Posted by Isedelyod

Another park placed inside a cricket oval. Taken from the 3DWarehouse.

No camera angles show up for this park and when i try to use it it kicks me out of 3D and to 2D. Darwin.

jg2977 · 08-31-2022, 04:03 PM

Quote:

Originally Posted by The Game

No camera angles show up for this park and when i try to use it it kicks me out of 3D and to 2D. Darwin.

Copy cameras from another park and then you should be able to use it.

The Game · 09-01-2022, 02:44 PM

Quote:

Originally Posted by jg2977

Copy cameras from another park and then you should be able to use it.

i have no clue how to do that. Want to guide me? Either here or PM.

Mr. HudsonBay · 09-01-2022, 04:12 PM

The best way to correct your issue would be to copy new cameras to your park. Go into SETTINGS, then EDIT BALLPARK, then 3D MODEL, then..

Press the "copy cameras from park" button. From there, you go into the /models folder for the park you want to copy the cameras from (or any previously loaded park--for example, I use \angel_stadium_of_anaheim), then load the .ootp3d file.

You should see a message pop up that tells you how many cameras were copied. You will probably need to adjust some of them, so be sure to cycle through, make sure they are all looking at the field and not obstructed, and save your changes by saving the park.

Dutch Alexander · 12-01-2022, 07:02 PM

Quote:

Originally Posted by Isedelyod

Finally finished the home field of the Regensburg Buchbinder Legionnaires in Germany. Played host to the WBC qualifying round. Took an existing 3DWarehouse model and have been modding it quite a bit. It should be on my Onedrive later today as I have a few minor tweaks to make.

Noticed that the grid is not alligned with the field. Left field line is off by about 5 degrees.

Clovidequano Dovatha · 01-14-2023, 02:12 PM

Quote:

Originally Posted by Clovidequano Dovatha

Bible Hill Stadium showing as pretty much all black under the 3d Model tab when in OOTP 22, at least for me, for some reason, without me doing anything at all, except for trying to load the model properly and all, of course, Isedelyod. Don't know why, unfortunately. Any suggestions? Please advise. Thank you. CD out.

Isedelyod, you still haven't answered my question here. Why do you think it might be appearing black when it shouldn't actually be doing so here, in the relevant dynasty where it's being used for a team in it? Just wondering, and also wondering what I should most likely do to make sure it shows up as it should show up in that game, of course. Please advise. Thank you. CD out.

Isedelyod · 01-16-2023, 10:08 AM

I must not have painted the reverse side on Sketchup. Unfortunately, I no longer have my Sketchup subscription, so I can't fix it.

Clovidequano Dovatha · 01-16-2023, 10:46 AM

Could you probably perhaps redo the stadium, then, somehow? That's if you can't renew it, or don't want to, of course, Isedelyod. For it looks like a really nice stadium suitable for the Ferguson Firebrands. However, if it's black, at least in the 3d sense, in certain areas, it might not then be usable here, it seems to me, unfortunately.

If you can't actually fix or redo the stadium in question here, sometime in the near future, do you perhaps then have any present suggestions on a park similar to it that I could use instead for the relevant team in its applicable dynasties that I've created or may create in the future? Just wondering, that's all. Simply because once I am finally able to somehow get the first draft of my current main writing project done here well enough, I fully intend to play OOTP and/or do certain other things for a little while as I try to recharge my mental batteries, so to speak, in relation to that same project, as best and as quickly as I can, before resuming work on it again. CD out.

09-01-2022, 04:12 PM	#186
Mr. HudsonBay Bat Boy Join Date: Jul 2020 Location: Howell, MI Posts: 18	The best way to correct your issue would be to copy new cameras to your park. Go into SETTINGS, then EDIT BALLPARK, then 3D MODEL, then.. Press the "copy cameras from park" button. From there, you go into the /models folder for the park you want to copy the cameras from (or any previously loaded park--for example, I use \angel_stadium_of_anaheim), then load the .ootp3d file. You should see a message pop up that tells you how many cameras were copied. You will probably need to adjust some of them, so be sure to cycle through, make sure they are all looking at the field and not obstructed, and save your changes by saving the park. __________________ "You lollygag the ball around the infield. You lollygag your way down to first. You lollygag in and out of the dugout. You know what that makes you, Larry?” Lollygaggers!

01-16-2023, 10:08 AM	#189
Isedelyod Hall Of Famer Join Date: Dec 2012 Location: PEI, Canada Posts: 5,618	I must not have painted the reverse side on Sketchup. Unfortunately, I no longer have my Sketchup subscription, so I can't fix it. __________________ "Don't try to be a hero. Be a soldier." - George Brett My older mods- https://onedrive.live.com/?cid=28c2b...3&action=Share My newer mods (updated logos) https://drive.google.com/drive/folde...Fg?usp=sharing

01-16-2023, 10:46 AM	#190
Clovidequano Dovatha Hall Of Famer Join Date: Feb 2018 Location: Somewhere in the United States of America on God's Earth Posts: 6,896	Could you probably perhaps redo the stadium, then, somehow? That's if you can't renew it, or don't want to, of course, Isedelyod. For it looks like a really nice stadium suitable for the Ferguson Firebrands. However, if it's black, at least in the 3d sense, in certain areas, it might not then be usable here, it seems to me, unfortunately. If you can't actually fix or redo the stadium in question here, sometime in the near future, do you perhaps then have any present suggestions on a park similar to it that I could use instead for the relevant team in its applicable dynasties that I've created or may create in the future? Just wondering, that's all. Simply because once I am finally able to somehow get the first draft of my current main writing project done here well enough, I fully intend to play OOTP and/or do certain other things for a little while as I try to recharge my mental batteries, so to speak, in relation to that same project, as best and as quickly as I can, before resuming work on it again. CD out. __________________ Some Favorite Bible Verses: Proverbs 16:7 KJV Romans 12:18 KJV Philippians 2:1-11 KJV DeviantArt: https://www.deviantart.com/clovidequano-dovatha GBA: https://forums.ootpdevelopments.com/...d.php?t=316515 EC's IPA: https://forums.ootpdevelopments.com/...d.php?t=158631 Updates to my various threads may be delayed or sporadic, and requests may still be some time away, while I continue working on LUtD. CD out.

08-10-2022, 05:05 PM	#181
sdw1000 All Star Reserve Join Date: Dec 2011 Location: SC USA Posts: 862 Infractions: 0/1 (1)	Great job on the Cape Cod league ballparks, but it would've been helpful had you set the grid points.