|
||||
|
06-03-2018, 01:54 AM | #1 |
Hall Of Famer
Join Date: May 2003
Location: Under The Christmas Fish
Posts: 7,478
|
Why is my ballpark tiny?
I'm adding 3D crowds to my Paramount Park model following silvam's video, but when I try and test it out in game...well...I get this:
I can't seem to Auto-Adjust the grid because the 1, 2, and 3 clicks are all appearing the same place on the field and then when I press 4 the park just vanishes from view and I'm left with is the night sky. Any help on this would be appreciated. |
06-03-2018, 09:42 AM | #2 | |
Hall Of Famer
Join Date: Apr 2004
Location: Dedham, MA
Posts: 9,742
|
Quote:
You must have exported to .obj originallly with the sketchup exporter (before the pro trial ran out) I had to deal with this many times when I started to use the plugin objexporter. You need to put the dots somewhere close to home first and third which l know is difficult to do. I would gladly fix it for you if you have no luck at it. Just let me know where I can download it Sent from my iPhone using Tapatalk
__________________
Senior "Nancy Boy" of the OOTP Boards _______________________________________________ |
|
06-03-2018, 10:46 AM | #3 |
Hall Of Famer
Join Date: Apr 2004
Location: Dedham, MA
Posts: 9,742
|
Another thing to try. If you delete the ootp3d file. That may work. Although you will need to re do the grid to your park walls
Sent from my iPhone using Tapatalk
__________________
Senior "Nancy Boy" of the OOTP Boards _______________________________________________ |
06-03-2018, 10:51 AM | #4 |
Hall Of Famer
Join Date: May 2003
Location: Under The Christmas Fish
Posts: 7,478
|
Thanks - honestly, I don't remember if I ever exported this with the sketchup exporter or not since I originally made it a couple years (and one computer) ago.
I was able to get my Armour Park model working even though it had the same initial "tiny" problem, but for some reason I just can't seem to click on any of the bases on this one. Maybe you'll have better luck: http://www.mediafire.com/file/v8jp89...0Park_v1_1.zip Thanks! |
06-03-2018, 11:27 AM | #5 |
Hall Of Famer
Join Date: Apr 2004
Location: Dedham, MA
Posts: 9,742
|
fixed
replace your .ootp3d file with the attached and let me know
__________________
Senior "Nancy Boy" of the OOTP Boards _______________________________________________ |
06-03-2018, 12:33 PM | #6 |
Hall Of Famer
Join Date: May 2003
Location: Under The Christmas Fish
Posts: 7,478
|
That did it, thank you sir!
|
06-17-2018, 05:13 PM | #7 |
Hall Of Famer
Join Date: May 2003
Location: Under The Christmas Fish
Posts: 7,478
|
Gah! I'm having a similar issue with another park - this one I've imported from the 3d Warehouse and modified a bit, although I never exported an .obj file with anything but the plug-in. In this case, the model loads at a normal size, but I'm having the same can't click on the bases problem that causes the park to disappear. Any chance you can take a look and work your magic?
http://www.mediafire.com/file/nct7ce...ublix_Park.zip |
06-17-2018, 07:05 PM | #8 | |
Hall Of Famer
Join Date: Apr 2004
Location: Dedham, MA
Posts: 9,742
|
Quote:
Did you turn on the grid and see if it is too low and coming through the bottom of the model? Sometimes I need to flip model and do the base clicks that way or move the stadium down a few clicks so the grid is completely visible. I can take a look at any rate Sent from my iPhone using Tapatalk
__________________
Senior "Nancy Boy" of the OOTP Boards _______________________________________________ |
|
06-17-2018, 10:20 PM | #9 |
Hall Of Famer
Join Date: May 2003
Location: Under The Christmas Fish
Posts: 7,478
|
That was it! I just flipped the model over and clicked on the bases from below and it worked as expected. Thanks for the tip!
|
Bookmarks |
Thread Tools | |
|
|