Historical Exhibition - 3D Parks?

ganguy · 05-19-2020, 08:46 AM

When setting up a seven game exhibition between two teams, is it possible to use the 3D stadiums of those two clubs? If so, where are they assigned?

Thank you,

moore4807 · 05-19-2020, 02:23 PM

You will find them in the Mods forums here. Some stadiums are specific to the year of the game due to graphics limitations.

ganguy · 05-19-2020, 02:39 PM

I have all of the stadiums.

I don't see where they can be assigned in the Historical Exhibitions. The stadium that shows up when the game starts seems to be a generic one.

moore4807 · 05-20-2020, 01:51 PM

Ok - easy fix I believe, when you start your series, go into each team and look for settings - you can modify the stadiums under those settings, at least in OOTP20 you can... IF you control the team that is, if you don't, then you wont!

ganguy · 05-20-2020, 05:39 PM

I am trying to do this thru Historical Exhibition.

Where do I "go into each team and look for settings?"

Where do I assume control of one team in Historical Exhibition?

There is an Options tab with a Ballpark section but it will not allow it to be changed. The ballpark is generic. It certainly isn't the Polo Grounds.

For a game that touts 3D stadiums and then doesn't permit them to be used in a 64 team tournament is pretty questionable.

moore4807 · 05-20-2020, 09:12 PM

Well you got me there ganguy.

Most people I know here are doing simulations of seasons and that is where you are in control of a franchise, I don't play many tournaments. I'd have to ask you - when you start a tournament, does the screen offer you to take control of one of those teams? If so THEN that's where is game settings you would change the stadium- just like you would change in World settings for a season simulation.

I went and looked and I can change my teams stadium BUT I have to have either a downloaded or created stadium to replace the "old" stadium. (like your pointing out the "Polo Grounds")

Step one - Choose game then go to the bottom "Game Settings"
Step Two - Under "League Settings" you will see the "Edit Ballparks" - choose that.
Step three - find the ballpark your team uses - edit or add your park over that original park and click save. That's how it works in OOTP20 simulations, again I don't know how the tournaments do it.

Also you are in historical simulations thread - the help you are looking for is more likely found in OOTP20 or OOTP21 technical support, depending on which game you have.

05-19-2020, 08:46 AM	#1
ganguy Minors (Single A) Join Date: Jun 2003 Posts: 50	Historical Exhibition - 3D Parks? When setting up a seven game exhibition between two teams, is it possible to use the 3D stadiums of those two clubs? If so, where are they assigned? Thank you,

05-19-2020, 02:23 PM	#2
moore4807 All Star Starter Join Date: May 2002 Location: Punta Gorda FL. Posts: 1,388	Historical parks are in... You will find them in the Mods forums here. Some stadiums are specific to the year of the game due to graphics limitations.

05-20-2020, 01:51 PM	#4
moore4807 All Star Starter Join Date: May 2002 Location: Punta Gorda FL. Posts: 1,388	Specific stadiums Ok - easy fix I believe, when you start your series, go into each team and look for settings - you can modify the stadiums under those settings, at least in OOTP20 you can... IF you control the team that is, if you don't, then you wont!

05-20-2020, 09:12 PM	#6
moore4807 All Star Starter Join Date: May 2002 Location: Punta Gorda FL. Posts: 1,388	Historical Parks in a tournament Well you got me there ganguy. Most people I know here are doing simulations of seasons and that is where you are in control of a franchise, I don't play many tournaments. I'd have to ask you - when you start a tournament, does the screen offer you to take control of one of those teams? If so THEN that's where is game settings you would change the stadium- just like you would change in World settings for a season simulation. I went and looked and I can change my teams stadium BUT I have to have either a downloaded or created stadium to replace the "old" stadium. (like your pointing out the "Polo Grounds") Step one - Choose game then go to the bottom "Game Settings" Step Two - Under "League Settings" you will see the "Edit Ballparks" - choose that. Step three - find the ballpark your team uses - edit or add your park over that original park and click save. That's how it works in OOTP20 simulations, again I don't know how the tournaments do it. Also you are in historical simulations thread - the help you are looking for is more likely found in OOTP20 or OOTP21 technical support, depending on which game you have. Attached Images

05-19-2020, 02:39 PM	#3
ganguy Minors (Single A) Join Date: Jun 2003 Posts: 50	I have all of the stadiums. I don't see where they can be assigned in the Historical Exhibitions. The stadium that shows up when the game starts seems to be a generic one.

05-20-2020, 05:39 PM	#5
ganguy Minors (Single A) Join Date: Jun 2003 Posts: 50	I am trying to do this thru Historical Exhibition. Where do I "go into each team and look for settings?" Where do I assume control of one team in Historical Exhibition? There is an Options tab with a Ballpark section but it will not allow it to be changed. The ballpark is generic. It certainly isn't the Polo Grounds. For a game that touts 3D stadiums and then doesn't permit them to be used in a 64 team tournament is pretty questionable.