Clueless

aharm84 · 05-30-2005, 06:26 PM

How on earth do I obtain and load the actual MLB rosters(player names), parks, photos etc on to my OOTP 6 game? Ive tried downloading about 5 different roster files on my computer but cant figure out how to use them, so im starting from scratch and deleting them. What is a good site that I can find the stuff I'm looking for at and how do i load it? Also maybe I dont have the right requirements for .zip files, any ideas on what the reqirements are for using them? Thanks in advance for any help

Steve Kuffrey · 05-30-2005, 06:32 PM

http://www.ootpdevelopments.com/boar...ad.php?t=95373 easiest.

aharm84 · 05-30-2005, 06:37 PM

how do i load that into my game after its saved on my computer?

Steve Kuffrey · 05-30-2005, 06:38 PM

Unzip then follow the instructions, the thread it is posted in also may help.

aharm84 · 05-30-2005, 07:07 PM

allright, i did that and it all seemed to work fine, but now my OOTP wont open at all and this error comes up when i try to open it

OOTP6 caused an invalid page fault in
module <unknown> at 0000:b00ba230.
Registers:
EAX=00f0f7bc CS=0177 EIP=b00ba230 EFLGS=00010203
EBX=b00ba230 SS=017f ESP=00f0f7a8 EBP=00f0f81c
ECX=baad0cf6 DS=017f ESI=00f0f85c FS=117f
EDX=00017ce4 ES=017f EDI=00f0f7e0 GS=0000
Bytes at CS:EIP:

Stack dump:
baad0cfc 00f0f7bc 00f0fbf0 00000000 00f0fab0 8558223c 00004000 00000000 00060254 87ea0000 047787a7 00000000 00000000 00000000 0000072e 00000000

any idea what this means?

aharm84 · 05-30-2005, 07:26 PM

Now my OOPT6 won't even get to the error page, when i try to open it it comes up with a small popup screen that says
Create Surface:Backbuffer
NoDirectDrawHW
and my only option is to click OK, after clicking ok another small popup window comes up that says
InitApp
ErroInitDirectDraw
and my only option is to click OK

Steve Kuffrey · 05-30-2005, 08:42 PM

Go into the “game”(OOTP, ITP, etc) folder and open the "game config" file, toggle the 3d setting, close those things and try the game again.

If that doesn't solve it, go to start then run and type dxdiag and hit enter. The direct X utility will open and it will let you know what version of direct X you are have installed. If it is less than v9 go to http://www.microsoft.com download and install v9, reboot your computer and then try the game again.

One of these two things should get things going. Please let me know if you are still having problems after trying both of these.

05-30-2005, 06:26 PM	#1
aharm84 Bat Boy Join Date: May 2005 Posts: 4	Clueless How on earth do I obtain and load the actual MLB rosters(player names), parks, photos etc on to my OOTP 6 game? Ive tried downloading about 5 different roster files on my computer but cant figure out how to use them, so im starting from scratch and deleting them. What is a good site that I can find the stuff I'm looking for at and how do i load it? Also maybe I dont have the right requirements for .zip files, any ideas on what the reqirements are for using them? Thanks in advance for any help

05-30-2005, 06:32 PM	#2
Steve Kuffrey Administrator Join Date: Jul 1999 Location: S.E. TN - Georgia born and raised Posts: 17,036	http://www.ootpdevelopments.com/boar...ad.php?t=95373 easiest. __________________ Steve Kuffrey DABS Atlanta Braves - 2008 Eastern Division Champ *DBLC Atlanta Braves - 2011, 2014 East Division Champ, 2012, 2013 NL Wildcard Baseball Maelstrom-Montreal Expos-2013 Tourney winner, 2014 WC Team Sparky's League - Tampa Bay D'Rays Epicenter Baseball League - Astros 2014 The CBL Rewind - Phillies '95

05-30-2005, 06:38 PM	#4
Steve Kuffrey Administrator Join Date: Jul 1999 Location: S.E. TN - Georgia born and raised Posts: 17,036	Unzip then follow the instructions, the thread it is posted in also may help. __________________ Steve Kuffrey DABS Atlanta Braves - 2008 Eastern Division Champ *DBLC Atlanta Braves - 2011, 2014 East Division Champ, 2012, 2013 NL Wildcard Baseball Maelstrom-Montreal Expos-2013 Tourney winner, 2014 WC Team Sparky's League - Tampa Bay D'Rays Epicenter Baseball League - Astros 2014 The CBL Rewind - Phillies '95

05-30-2005, 08:42 PM	#7
Steve Kuffrey Administrator Join Date: Jul 1999 Location: S.E. TN - Georgia born and raised Posts: 17,036	Go into the “game”(OOTP, ITP, etc) folder and open the "game config" file, toggle the 3d setting, close those things and try the game again. If that doesn't solve it, go to start then run and type dxdiag and hit enter. The direct X utility will open and it will let you know what version of direct X you are have installed. If it is less than v9 go to http://www.microsoft.com download and install v9, reboot your computer and then try the game again. One of these two things should get things going. Please let me know if you are still having problems after trying both of these. __________________ Steve Kuffrey DABS Atlanta Braves - 2008 Eastern Division Champ *DBLC Atlanta Braves - 2011, 2014 East Division Champ, 2012, 2013 NL Wildcard Baseball Maelstrom-Montreal Expos-2013 Tourney winner, 2014 WC Team Sparky's League - Tampa Bay D'Rays Epicenter Baseball League - Astros 2014 The CBL Rewind - Phillies '95

05-30-2005, 06:37 PM	#3
aharm84 Bat Boy Join Date: May 2005 Posts: 4	how do i load that into my game after its saved on my computer?

05-30-2005, 07:07 PM	#5
aharm84 Bat Boy Join Date: May 2005 Posts: 4	allright, i did that and it all seemed to work fine, but now my OOTP wont open at all and this error comes up when i try to open it OOTP6 caused an invalid page fault in module <unknown> at 0000:b00ba230. Registers: EAX=00f0f7bc CS=0177 EIP=b00ba230 EFLGS=00010203 EBX=b00ba230 SS=017f ESP=00f0f7a8 EBP=00f0f81c ECX=baad0cf6 DS=017f ESI=00f0f85c FS=117f EDX=00017ce4 ES=017f EDI=00f0f7e0 GS=0000 Bytes at CS:EIP: Stack dump: baad0cfc 00f0f7bc 00f0fbf0 00000000 00f0fab0 8558223c 00004000 00000000 00060254 87ea0000 047787a7 00000000 00000000 00000000 0000072e 00000000 any idea what this means?

05-30-2005, 07:26 PM	#6
aharm84 Bat Boy Join Date: May 2005 Posts: 4	Now my OOPT6 won't even get to the error page, when i try to open it it comes up with a small popup screen that says Create Surface:Backbuffer NoDirectDrawHW and my only option is to click OK, after clicking ok another small popup window comes up that says InitApp ErroInitDirectDraw and my only option is to click OK