Quote:
Originally Posted by yount19
Most of the parks that I have downloaded from you have the aerial view of the park... how do I change it to the typical press box view?
Thanks in advance for any help...
|
I think I set them all up for and aerial and wide view. A few had been set up view from left field by someone else, Silvam I assume. Of course you can look at all the view that were with the parks I modified in the 3D Model edit screen using the Edit Camera Views. Most of mine have 2 views overhead and wide. Getting views from the press box could be challenging. As far as I can determine, there is no way to get a view from inside the parks. That is why I had to take out part of roof behind home plate to enable a wide view of the field. You will notice on the park models with closed roofs, e.g. Astrodome and Kingdome there is no complete roof. If there was, you could not see into the park. Maybe some day the developers will come up with a camera angle from inside the parks. If you want to fool around with the views to see if you can come up a view that might resemble a press box view just use the Rotate View and Move View buttons in on the edit park screen. I highly recommend that change the values in the Degrees and Cm boxes to something a lot lower so that you can change the views in smaller increments. I change them to 1 when I set the views.After you get the view you want, select Select Cam then Create New and name it whatever you want. I hope this helps and thanks for the tips for Baker signs.